Vision
Electronics
AnomalyClassification
Solder Joint Inspection
Detects over-solder, under-solder, missing solder, and bridging on PCB joints — reducing manual inspection and electrical failures.
4-class
joint grading
/ The Challenge
Solder defects drove field failures; manual microscope inspection was a bottleneck and inconsistent.
/ What We Deployed
AI classification grades each joint for the four failure classes at line pace, feeding rework with exact joint locations.
/ The Results
- Four defect classes graded per joint
- Rework guided to exact joints
- Field failure rate cut
More in Electronics
Vision
Electronics
PCB Child Component Assembly Check with Orientation
Verifies all child components on a PCB with orientation checking — plus integrity checks like scratch and dent detection on relays.
1 pass full board check
Case study →
Vision
Electronics
Bent & Short Pin Inspection
Measures connector pin position, angle, and spacing to catch bent, short, and damaged pins before assembly.
Px + angle per pin
Case study →
Vision
Electronics
Fiducial Position & Control
Detects PCB fiducials and computes dx/dy against master reference, feeding the PLC for live process correction and alignment control.
dx/dy to PLC live
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.