Vision
Automotive
MeasurementAnalytics
Headlamp Alignment & Intensity Inspection
Verifies headlamp beam alignment and intensity against specification — misaligned lamps adjusted automatically via CAN / LIN communication.
CAN/LIN
closed loop
/ The Challenge
Manual beam checks were subjective; misaligned or weak lamps escaped, a direct safety and compliance issue.
/ What We Deployed
Cameras measure beam pattern and intensity; the system commands automatic adjustment over CAN/LIN and rejects lamps out of spec.
/ The Results
- Beam geometry measured objectively
- Auto-adjustment closes the loop
- Lighting compliance assured
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.