Vision
Automotive
Detection
Presence–Absence Inspection
Verifies all required components — screws, clips, connectors, labels — are present in an assembly before it moves to the next process.
BOM-level
verification
/ The Challenge
Incomplete assemblies moved downstream, multiplying rework cost at every subsequent station.
/ What We Deployed
Per-station detection verifies the full bill-of-parts before release to the next process, with instant NG feedback.
/ The Results
- Incomplete assemblies stopped at source
- Downstream rework cut
- Widely reusable across stations
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.