Vision
Automotive
Measurement
Snap Ring Center Distance & Orientation Check
Measures center-to-center distance between snap-ring features and verifies orientation before assembly — deviations rejected automatically.
Non-contact
gauging
/ The Challenge
Out-of-spec ring geometry caused assembly failures detected only at fitment.
/ What We Deployed
Vision measurement gauges the critical distances and orientation per ring, rejecting deviation before the assembly station.
/ The Results
- Critical distances gauged per ring
- Fitment failures prevented
- No contact gauging wear
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.