Vision
Automotive
Detection
Thread Inspection System
Verifies presence of threads, holes, and slots on machined parts — rejection triggered if any feature is missing. Multi-brand parts on the same software.
Multi-brand
one system
/ The Challenge
Missing threads and unfinished holes escaped to assembly, where they cost far more to find.
/ What We Deployed
Cameras verify every required thread, hole, and slot per part; brand switch-over between similar parts takes seconds in software.
/ The Results
- Missing features caught at source
- Multi-brand line on one system
- Assembly-stage failures reduced
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.